$2,000
the Vibration monitoring protection device is mainly used in power, steel, construction material, chemical industry.
It can monitor and measure the absolute vibration of the bush and the relative vibration of the
spindle on the rotation machinery so that the operator can
know the working condition of the machinery and provide
corresponding maintenance.
Description
●Frequency Range: 10-300HZ
●Input signal: SG-2 vibration speed sensor
(to measure the absolute vibration of the bush)
●Display pattern: Passage A and Passage B shows the
value independently.
●Linearity resolution: ≤±0.5% (Full range)
●Output:
1. Current: 4～20mA corresponds to the maximum and
minimum figure on the range
(less than 1kΩ can be output to DCS system)
2. TDM wave analysis output
3. RS485 communication port output
4. Alarm and danger switching output: ( DC24V/2A)
●Used under this temperature:
Device: -15-55℃ (relative humidity ≤80%)
SG-2 normal temperature sensor -25 -100℃
(relative humidity ≤90%)
SG-2W high temperature proof sensor -25-160℃
(relative humidity ≤90%)
●Power supply: AC220V/50HZ±10%
●Installation: Disc installed or installed in the site
protection box(protection degree: IP65)
